SMART Hub

Power Source: Standard wall outlet

Care Tips:

Keep the hub plugged in at all times, it is the “brain” of the system and must stay powered.

If the hub becomes unresponsive, unplug it for 10 seconds and reconnect.

Avoid power boards with switches that may be accidentally turned off.

SMART Wi‑Fi Plugs

Power Source: Wall outlet (no internal battery)

Care Tips:

Ensure each plug is firmly inserted into the socket.

Do not overload the plug — only connect standard household appliances (lamps, kettles, fans, etc.).

If a plug stops responding, unplug it for 5 seconds and reconnect to refresh communication with the hub.

SMART Button 

Power Source: Internal battery

Care Tips:

Replace the battery if button presses no longer trigger the “up” or “down” chime.

Keep the button within 10 metres of the SMART Hub for reliable communication.

Avoid moisture and direct heat — store the button indoors only.

Motion Sensor Rechargeable Lights

Power Source: Built‑in rechargeable battery

Charging:

Charge using the supplied USB cable until the indicator light turns green.

Typical charge time: 2–3 hours depending on usage.

Care Tips:

Recharge when brightness begins to fade or motion detection becomes inconsistent.

Mount in areas free from direct sunlight or heat sources to protect battery life.

Clean the sensor lens gently with a dry cloth to maintain detection accuracy.

Pre‑Programmed Router

Power Source: Wall outlet

Care Tips:

Keep the router powered continuously for stable communication between devices.

If the system becomes unresponsive, unplug the router for 30 seconds and reconnect.

Ensure the Ethernet cable is firmly connected to your home router.

General Power Tips

Keep all devices in well-ventilated areas to prevent overheating.

Avoid using damaged power cables or adapters.

Do not expose any device to water or excessive humidity.

If you experience a full system outage, restart devices in this order:

SMART Hub

Router

SMART Plugs